Wall Plate AP - Dual radio (802.11 b/g/n/ax 2x2 MU-MIMO and 802.11 a/n/ac/ax 2x2 MU-MIMO), internal antennas, 4 x 10/100/1000 RJ

Vendor: Fortinet 

Category: Network equipment / Access point 

Article number: FAP-23JF-I/Demo 

TNVED: 8517 62 00 00 

Description: Type of equipment

Stenjek for home / desktop AP

Number of radios

3+1 BLE

Number of antennas

4 single-band Wi-Fi + 1 dual-band scan + 1 single-band BLE/ZigBee 2.4GHz

Antenna type and maximum gain

Antenna on the printed circuit board

Dual-band

4.0 dBi in the 2.4GHz band and 4.0 dBi in the 5 GHz band

3.5dBi BLE antenna in the 2.4GHz band

Frequency bands (GHz)

2,400–2,4835, 5,150–5,250, 5,250–5,350, 5,470–5,725, 5,725–5,850

Radio 1 Features

2.4GHz frequency range

Channel width

20/40 MHz

Modulation

BPSK, QPSK, 64/256/1024 QAM

MIMO Chains

2x2 Service

Radio 2 Features

Frequency range 5.0 GHz

Channel width

20/40/80 MHz

Modulation

BPSK, QPSK, 64/256/1024 QAM

MIMO Chains

2x2 Service

Radio 3 Features

The frequency bands are 2.4GHz and 5.0 GHz. Chains

MIMO

scanning of the 1x1 frequency.

Maximum data transfer rate

Radio 1

up to 574 Mbps

Radio 2

up to 1200 Mbps

Radio 3

frequency scan only

Bluetooth with low power consumption

Bluetooth scanning and iBeacon advertising at a maximum transmission power of 10 dBm

Interfaces

7 10/100/1000 Base-T RJ45 ports (1x 802.3 at PoE (PD), 1x 802.3 af PoE (PSE), 2x Non-PoE ports, 1x End-to-end input, 1x end-to-end output, 1x RS-234

Power supply via Ethernet (PoE)

1 x 802.3 at PoE by default

Operating modes

power supply 802.af PoE – radio communication; powered by 802.3 at – all radios+PSE (7W); Powered by DC adapter – all radios + USB + PSE (802.3 af)

Simultaneous SSIDs

Up to 16 (14 if background scanning is enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device authentication

WPA™, WPA2™ and WPA3™ with 802.1 x or previous key, WEP, Web Captive Portal, MAC blacklist and Permissions list

Maximum Tx power (produced)

of 1 2.4GHz Radio

23 dBm/200 MW (2 circuits together)

Radio 2

5 GHz 22 dBm/158 MW (2 circuits together)

Radio 3

no data available

Kensington Castle

yes

IEEE standards

802.11 a, 802.11 b, 802.11 e, 802.11 g, 802.11 h, 802.11 i, 802.11 j, 802.11 k, 802.11 n, 802.11 r, 8-2. Fi 6), 802.1 Q, 802.1 X, 802.3 ad, 802.3 af, 802.3 at, 802.3 az, 802.3 bz

Supported SSID types

Local bridge, tunnel and grid

Radio client capacity

Up to 512 radio clients (Radio1 and Radio2)

The coexistence of cellular communications

yes

The LED is off

yes

OFDMA

yes

Spatial Reuse (BSS coloring)

yes

UL Mode

MU-MIMO 802.11 yes

DL-MU-MIMO

yes

Improved Target Wake-up time (TWT)

Yes 

Completion: Access point